M-Series service space disconnection metal cover

Application of Series M Expansion Joint Cover Profiles

Agor Company’s Series M profiles are designed for covering expansion joints in areas where various vehicles pass, such as parking lots, as well as service and utility spaces. In this group of products, due to the type and location of use and to increase durability and efficiency, all-metal covers have been used.
These profiles can be installed in both floors and walls. The load capacity of these products is very high, and they have the ability to withstand the passage of semi-heavy and heavy vehicles.
In addition to adapting to movements caused by thermal expansion and contraction of the structure, during an earthquake, floor profiles act in a sliding manner and wall profiles act in a hinged manner. Due to the increased load-bearing capacity, the profiles in this group are heavier than other products. For example, in the MSX profile, which has the capability to bear the load of heavy vehicles, the middle part of the joint cover is made of steel and designed in a truss form.

Comparison Table for Different Product Models

Comparison of Different Product Models

The presented table provides a comprehensive comparison between four different models (MSF, MSX, MSW, MSWC) of a product based on various criteria such as model, installation location, space type, position, environmental conditions, installation method, load capacity, and joint width (cm). This table is very useful for selecting the appropriate model based on project needs.

Key Points from the Table Analysis:

• Model and Specialized Application:

  • MSF and MSX: Both models are designed for floors, are suitable for both interior and exterior spaces, are used in flush positions, and can be installed in dry and wet environments. Their main difference lies in joint width and load capacity. MSF with a joint width of 10-15 cm and “high” load capacity, and MSX with a joint width of 20-40 cm and “very high” load capacity, is suitable for heavier loads. The installation method for both is “recessed.”
  • MSW and MSWC: These two models are designed for walls, and both are usable for interior and exterior spaces, and in dry and humid environments. The installation method for both is “surface-mounted.” The MSW model is designed for flush positions and the MSWC model for corner positions, indicating the specialized application of MSWC for corners and angles. The information for load capacity for these two models is listed as “-” (unspecified), which might mean that load bearing has a different meaning in walls or that these models are primarily used for covering and aesthetics (without bearing direct loads). The joint width for both MSW and MSWC models is 20-50 cm.
• Flexibility in Location and Space Type: Most models (except MSWC which is for corners) can be installed in interior and exterior spaces as well as in flush positions, which increases the product’s flexibility in various applications.
• Adaptation to Environmental Conditions: All models are suitable for dry environments, while floor models (MSF, MSX) are also usable in wet environments and wall models (MSW, MSWC) are also usable in humid environments. This feature expands the product’s application range in different environments with varying humidity conditions.
• Installation Method: The difference in installation method, “recessed” for floor models and “surface-mounted” for wall models, indicates a design tailored to the installation location. Recessed installation in floors is typically used to maintain a flat surface and prevent tripping hazards, while surface mounting on walls may be for ease of installation or aesthetic reasons.

Overall, this table effectively highlights the differences and capabilities of each model and helps users make the right choice by considering factors such as installation location (floor or wall), load capacity needs (high or very high), environmental conditions (dry, wet, humid), and the required joint width.